It is a paint "Concrete Effect Paint" that expresses the color of our original concrete. It can be painted on wood, exterior walls, interior walls, wallpaper, fittings, etc. It will be a matte paint of water-based acrylic. This "Concrete Effect Paint" is a paint that is finished in three colors: "Shadow Base", "Shadow Dark Gray", and "Shadow Sand". 【Applications】 Woodwork, indoor and outdoor mortar walls, kitchens, ceilings, plaster boards, wallpaper, etc. 【Features】 ・It is used for interior and exterior construction. ・Can be diluted with water. ・It is matte. ・After drying, it is resistant to water and does not dissolve. 【How to use】 ・Be sure to adjust the substrate. ・If mold or mildew occurs on the old wall surface, treat it thoroughly with a mold remover. ・For walls that have undergone chalking (a state where white powder has been blown), use an impregnated sealer to harden the old wall before painting. ・ Apply cement gray to the base, and after drying, apply cement dark gray diluted 5 times with water, shadow sand in an uneven manner (use a rolled plastic bag or sponge, etc.) To finish, blend the whole thing with diluted cement gray. [Thinning rate: water] ・ In the case of brush / roller coating: 0 to 5% ・For air spray: 10-15% [Drying time] ・ Finger touch drying time (time until it does not stick to your fingers after touching): 30 minutes ・Curing time: 2 hours [Coating properties] ・Water resistance: 30 days or more, no change ・Acid resistance: 30 days or more, no change ・Alkali resistance: 48 hours or more, no change ・Wash resistance: 500 times or more [Precautions for painting] ・Do not use at temperatures below 5°C. ・Wash painting tools with water immediately after use. Once it dries, it does not dissolve in water again. ・ When used externally, clear painting is recommended for finishing. ・Please contact us if you want to use it on the floor or countertop.