Usage: Anti-fogging of glasses Contents: 20ml Ingredients: Water, Shell calcined calcium, Surfactant How to use: 1. Remove dirt, dust, sand, etc. adhering to both sides of the lens before using this product. 2. Apply 1~2 drops of this product to the lens surface and spread it evenly over the entire lens with a soft cloth. * Do not use an ultra-fine fiber cloth at this time. The anti-fogging film may fall off. 3. Let it dry for a few minutes and gently wipe it with a dry cloth so that it rubs against the lens. Do not use wet cloths or tissues at this time. Handling precautions: ● Do not use for anything other than its intended purpose. ● This product is not an eye drop. ● This product cannot be used for contact lenses and underwater glasses. ● Do not use on lenses that have a special coating. ● Depending on the material to be applied, there is a risk of deterioration, so please check in an inconspicuous place in advance before use. ● Shake well before use. ● After use, the anti-fogging effect may decrease if it is wiped in a humid state or if water is applied. ● After using the inner surface of the lens, if it is exposed to moisture or rain, the anti-fogging effect may flow. Please be careful not to get this in your eyes. ● Depending on the environment at the time of use, such as sudden temperature changes, it may not be able to exert a sufficient anti-fogging effect. ● Keep out of reach of children. ● After opening, use as soon as possible, avoid direct sunlight, high temperature and humidity, and store in a closed state in a cool and dark place. ● In the unlikely event that it gets in your eyes or accidentally ingested, immediately rinse with plenty of water and consult a doctor. ● Not all bacteria can be eradicated.