Store away from direct sunlight, high temperatures and humidity
Mill: Body Tenless, PP, Acrylic
Handle: Iron, PP
Grinder part ceramic
case
Beige: 100% cotton
Pattern: 65% polyester 35% cotton
Case size: length 26 cm width 10 cm
Mill size: Φ4.8cm×18.5cm (body) Approx. 15cm (handle length)
How to care
What < to prepare>
・Nylon brush
・Toothpicks
・Air duster
・Detergent
・Sponge
1. Wash the receiving container with water and wipe it well.
There may be ground residue left in the receiving container, so please check
2. Clean the outer blade with a nylon brush and toothpick
After removing the fine powder with a nylon brush, remove the dregs that are stuck to the teeth with a toothpick
3. Remove the inner blade base from the inner blade and clean it in the same way as the outer blade.
In the same way, remove the dregs with a brush and toothpick
4. Wash with kitchen detergent and wipe well
Wash and wipe the outer blade, inner blade, and inner blade base thoroughly
5. The main body blows fine powder with an air downer.
Wipe the oil on the inside and you're done.
#606eec73-0000-4b6b-8cf0-4c7df177a5d2