Installed with a quick release (QR) on the rear wheel! 1. Easy to attach and detach just by QR operation 　If you get used to →, you can put it on and remove it in 30 seconds!　No tools required! 2. Bikes that could not be equipped with a stand until now are also OK 　→ disc brakes, rear suspension, deformed frame, etc., for all bikes that use QR 3. Do not scratch the frame 　→ Safe installation that does not leave marks even on high-end motorcycles It can be easily installed and removed just by operating the QR code, so no tools are required. It can be installed regardless of the shape of the frame, and of course it is not affected by the suspension or disc brake pedestal. Moreover, the fixed parts to the end of the frame are rotatable and can be freely adjusted at an angle. It can be installed not only at the straight drop (inverted) end common on sports bikes, but also at the road end and the regular claw end, regardless of the direction of the end. 　In addition, the frame is only touched by the outer surface of the end where the QR housing is originally in contact and the inner surface of the end opening where the hub axis is in contact, so even if the stand is removed, the marks are not visible at all. 　The length of the legs can be adjusted with a single Allen key, and it is compatible with wheel diameters of 24~28 inches (700C). Although it is not guaranteed, it can be used for smaller diameter bicycles by cutting off some of the parts at the end of the leg. Adjustments are only required the first time you put it on, and no tools are required from the second time onwards, unless you change the tires or frame.